]> git.karo-electronics.de Git - mv-sheeva.git/commitdiff
au1000-eth: change multi-line comments style
authorFlorian Fainelli <florian@openwrt.org>
Wed, 8 Sep 2010 11:11:59 +0000 (11:11 +0000)
committerDavid S. Miller <davem@davemloft.net>
Fri, 10 Sep 2010 04:36:39 +0000 (21:36 -0700)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/au1000_eth.c
drivers/net/au1000_eth.h

index f4c394fa2d931e5ed22e5d53db1367320ea1f025..43489f89c142f7d10e25f0454287ef28939fd228 100644 (file)
@@ -229,11 +229,15 @@ static void au1000_mdio_write(struct net_device *dev, int phy_addr,
 static int au1000_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
 {
        /* WARNING: bus->phy_map[phy_addr].attached_dev == dev does
-        * _NOT_ hold (e.g. when PHY is accessed through other MAC's MII bus) */
+        * _NOT_ hold (e.g. when PHY is accessed through other MAC's MII bus)
+        */
        struct net_device *const dev = bus->priv;
 
-       au1000_enable_mac(dev, 0); /* make sure the MAC associated with this
-                            * mii_bus is enabled */
+       /* make sure the MAC associated with this
+        * mii_bus is enabled
+        */
+       au1000_enable_mac(dev, 0);
+
        return au1000_mdio_read(dev, phy_addr, regnum);
 }
 
@@ -242,8 +246,11 @@ static int au1000_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
 {
        struct net_device *const dev = bus->priv;
 
-       au1000_enable_mac(dev, 0); /* make sure the MAC associated with this
-                            * mii_bus is enabled */
+       /* make sure the MAC associated with this
+        * mii_bus is enabled
+        */
+       au1000_enable_mac(dev, 0);
+
        au1000_mdio_write(dev, phy_addr, regnum, value);
        return 0;
 }
@@ -252,8 +259,11 @@ static int au1000_mdiobus_reset(struct mii_bus *bus)
 {
        struct net_device *const dev = bus->priv;
 
-       au1000_enable_mac(dev, 0); /* make sure the MAC associated with this
-                            * mii_bus is enabled */
+       /* make sure the MAC associated with this
+        * mii_bus is enabled
+        */
+       au1000_enable_mac(dev, 0);
+
        return 0;
 }
 
@@ -380,7 +390,8 @@ static int au1000_mii_probe(struct net_device *dev)
        }
 
        /* find the first (lowest address) PHY
-        * on the current MAC's MII bus */
+        * on the current MAC's MII bus
+        */
        for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
                if (aup->mii_bus->phy_map[phy_addr]) {
                        phydev = aup->mii_bus->phy_map[phy_addr];
@@ -774,7 +785,8 @@ static void au1000_update_tx_stats(struct net_device *dev, u32 status)
                if (!aup->phy_dev || (DUPLEX_FULL == aup->phy_dev->duplex)) {
                        if (status & (TX_JAB_TIMEOUT | TX_UNDERRUN)) {
                                /* any other tx errors are only valid
-                                * in half duplex mode */
+                                * in half duplex mode
+                                */
                                ps->tx_errors++;
                                ps->tx_aborted_errors++;
                        }
@@ -1068,8 +1080,9 @@ static int __devinit au1000_probe(struct platform_device *pdev)
        aup->msg_enable = (au1000_debug < 4 ?
                                AU1000_DEF_MSG_ENABLE : au1000_debug);
 
-       /* Allocate the data buffers */
-       /* Snooping works fine with eth on all au1xxx */
+       /* Allocate the data buffers
+        * Snooping works fine with eth on all au1xxx
+        */
        aup->vaddr = (u32)dma_alloc_noncoherent(NULL, MAX_BUF_SIZE *
                                                (NUM_TX_BUFFS + NUM_RX_BUFFS),
                                                &aup->dma_addr, 0);
@@ -1226,7 +1239,8 @@ err_out:
                mdiobus_unregister(aup->mii_bus);
 
        /* here we should have a valid dev plus aup-> register addresses
-        * so we can reset the mac properly.*/
+        * so we can reset the mac properly.
+        */
        au1000_reset_mac(dev);
 
        for (i = 0; i < NUM_RX_DMA; i++) {
index 4b638df22240b25dfedb46fc9f28bd2de2d4dae0..6229c774552cbe507c05866a8602a9a3e175ee72 100644 (file)
@@ -100,7 +100,8 @@ struct au1000_private {
        int mac_id;
 
        int mac_enabled;       /* whether MAC is currently enabled and running
-                                (req. for mdio) */
+                               * (req. for mdio)
+                               */
 
        int old_link;          /* used by au1000_adjust_link */
        int old_speed;
@@ -119,7 +120,8 @@ struct au1000_private {
        int phy_irq;
 
        /* These variables are just for quick access
-        * to certain regs addresses. */
+        * to certain regs addresses.
+        */
        struct mac_reg *mac;  /* mac registers                      */
        u32 *enable;     /* address of MAC Enable Register     */